Our Cecather low temperature radiant foil system is compatible with any type of laminate and vinyl flooring.
First of all, we must differentiate the different most used systems of electric underfloor heating.
Our Cecather radiant foil system has no relationship with the so-called radiant wire, cable or mesh, both in its format and in its own operation.
“Cecather” radiant foils cover most of the surface to be heated, with very low w/m2 densities, with a homogeneous distribution of heat to avoid hot or cold areas, achieving optimal underfloor heating.
On the contrary, the radiant thread, as electrical resistance limited to a cable (minimum radiant emission), heats the floor in a very focused manner in a short period of time and indeed, at a high temperature in contact with a laminate, it could cause future damage to the pavement.
Add that the pavement, with the Cecather system, even without the latter being regulated with a temperature control (digital timer-thermostat), does not gradually reach more than 30-32ºC. This temperature is assimilable and does not destabilize the laminate flooring. On the other hand, remember that according to the UNE-EN 1264 Regulation, it establishes that the limit values of maximum surface temperature in floors must not exceed 29ºC in dwelling areas. For this reason and for this purpose, our system incorporates a device wifi programmable thermostat, which by reading its probe sensor, requires that the final temperatures on the surface do not exceed those 29ºC mentioned.
Finally, comment that our professional team has been a pioneer in Spain of the radiant foil system, carrying out heating installations since 1985, always with excellent results and with the approval of our clients.
All our installations are covered with a 10-year guarantee, covering both repair, replacement and cosmetic damage.